Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/02/28 11:48
From version 13.5
edited by Admin
on 2025/02/28 11:35
Change comment: There is no comment for this version
To version 15.1
edited by Admin
on 2025/02/28 11:46
Change comment: Загрузить новое вложение 1740743211495-929.png

Summary

Details

Page properties
Content
... ... @@ -53,19 +53,19 @@
53 53  
54 54  [[image:Battery management systems.BMS Main 3.3\. Configuration.3\.1 General information.WebHome@1735233230234-960.png||alt="I1735233230234-960.png" data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="340" width="450"]]
55 55  
56 -* Set the following connection settings and click the “Launch” button:
57 -** device or port name that corresponds to the BMS USB-CAN;
56 +* Select the corresponding USB-CAN apater and set the following connection settings and click the “Launch” button:
57 +** device or port name that corresponds to the USB-CAN adapter;
58 58  ** baud rate: 250 kbit/s;
59 -** BMS IMD Node ID (20 by default).
59 +** BMS IMD address (22 by default).
60 60  
61 -[[image:1740739961052-896.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="237" width="450"]]
61 +[[image:1740741924108-471.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="247" width="450"]]
62 62  
63 63  * In the opened window, click the “Send” button under "Reset and start bootloader" section. The device will reboot and will be waiting commands to update the firmware.
64 64  
65 -[[image:1740740038720-603.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="553" width="600"]]
65 +[[image:1740742073165-496.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="397" width="600"]]
66 66  
67 67  * **Select the menu “Monitor - Stop” or click the “Stop” button to release the serial port and allow to use it for updating the firmware.**
68 68  
69 69  ~11. Return to the “Updater” window and click the “Update” button. The updating process will start.
70 70  
71 -12. Wait the updating process is finished. Move the “+5V” switch to the “0” position. and disconnect the BMS IMD device from the BMS USB-CAN.
71 +12. Wait the updating process is finished. Disconnect the BMS IMD device from the USB-CAN adapter.
1740743211495-929.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content