Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/02/28 11:48
From version 10.1
edited by Admin
on 2025/02/28 11:11
Change comment: There is no comment for this version
To version 7.1
edited by Admin
on 2025/02/28 11:00
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,4 @@
1 -(% data-numbered-headings-start="5" style="--numbered-headings-start: 4;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
1 +(% data-numbered-headings-start="4" style="--numbered-headings-start: 3;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
2 2  = Firmware update =
3 3  
4 4  == Introduction ==
... ... @@ -17,9 +17,9 @@
17 17  
18 18  Follow the steps below:
19 19  
20 -~1. Connect the BMS Display to the BMS USB-CAN adapter.
20 +~1. Connect the BMS Display to the USB-CAN adapter.
21 21  
22 -2. Move switches of the BMS USB-CAN to the following positions:
22 +2. Move switches of the to the following positions:
23 23  
24 24  * 120 Ohm – “I”;
25 25  * +5V – “0”.
... ... @@ -38,11 +38,8 @@
38 38  
39 39  [[image:Battery management systems.BMS Logic 12.4\. Firmware update.WebHome@1733156153290-392.png||data-xwiki-image-style-alignment="center" height="320" width="296"]]
40 40  
41 -8. Select the CAN transport (BMS USB-CAN) (1.0.0) and click the “Settings” button to configure the adapter:
41 +8. Select the CAN transport (BMS USB-CAN) (1.0.0) and click the “Settings” button to configure the adapter: select port name that corresponds to the BMS USB-CAN adapter and 250 kbit/s baud rate.
42 42  
43 -* select port name that corresponds to the BMS USB-CAN adapter;
44 -* set 250 kbit/s baud rate.
45 -
46 46  [[image:1740738923079-336.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
47 47  
48 48  9. Click the “Browse…” button and open the new firmware file in .srec format.