Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/02/28 11:48
From version 1.2
edited by Admin
on 2025/02/28 10:31
Change comment: There is no comment for this version
To version 1.1
edited by Admin
on 2025/02/28 10:29
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -8,20 +8,24 @@
8 8  Required hardware and software:
9 9  
10 10  * PC or laptop with Windows 10 or newer;
11 -* BMS USB-CAN – a device to power and communicate with the BMS Display;
11 +* BMS USB-CAN adapter – a device to power and communicate with the BMS Display;
12 12  * [[ElectricDeviceMonitor>>https://movicomelectric.com/wa-data/public/site/app/ElectricDeviceMonitorSETUP.exe]] – a software to monitor and configure devices by Movicom Electric;
13 -* Firmware (*.srec) – a new firmware for the BMS Display.
13 +* Firmware (*.srec) – a new firmware for the BMS Logic 12/18.
14 14  
15 15  == Updating process ==
16 16  
17 17  Follow the steps below:
18 18  
19 -~1. Connect the BMS Display to the BMS USB-CAN with harnesses:
19 +~1. Connect the BMS Logic 12 or 18 to the BMS USB-RS485 with harnesses:
20 20  
21 -2. Move switches of the BMS USB-CAN to the following positions:
21 +* X1 header of the BMS Logic device – to the side (“Cells”) header of the BMS USB-RS485;
22 +* X4 header of the BMS Logic device – to the upper header of the BMS USB-RS485.
22 22  
24 +2. Move switches of the BMS USB-RS485 to the following positions:
25 +
23 23  * 120 Ohm – “I”;
24 -* +5V – “1”.
27 +* Cells – “0”;
28 +* +5V – “0”.
25 25  
26 26  3. Connect the BMS USB-RS485 to a PC.
27 27