Skip to Content

Changes for page 3. Configuration

Last modified by Admin on 2025/03/03 17:35
From version 8.1
edited by Admin
on 2024/12/12 13:45
Change comment: There is no comment for this version
To version 9.1
edited by Admin
on 2025/02/27 13:13
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,7 +1,7 @@
1 1  (% data-numbered-headings-start="3" style="--numbered-headings-start: 2;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
2 2  = Configuration =
3 3  
4 -The BMS IMD 1.x is configured over the CAN bus. The device is a slave in the CANopen network. The ElectricDeviceMonitor software is used for configuring and monitoring device via the USB-CAN adapter. This software supports Systec USB-CANmodul1, PEAK PCAN-USB, Marathon CAN-bus-USB и BMS USB-CAN adapters.
4 +The BMS IMD is configured over the CAN bus. The device is a slave in the CANopen network. The ElectricDeviceMonitor software is used for configuring and monitoring device via the USB-CAN adapter. This software supports Systec USB-CANmodul1, PEAK PCAN-USB, Marathon CAN-bus-USB и BMS USB-CAN adapters.
5 5  
6 6  == Connecting to the device ==
7 7  
... ... @@ -36,11 +36,11 @@
36 36  
37 37  == Changing device parameters ==
38 38  
39 -The BMS IMD 1.x parameters are summarized in the "Settings" tab of the "Unified monitor" window.
39 +The BMS IMD parameters are summarized in the "Settings" tab of the "Unified monitor" window.
40 40  
41 41  === Insulation measurement parameters ===
42 42  
43 -To change the internal parameters of the BMS IMD 1.x, select the «IMD» section:
43 +To change the internal parameters of the BMS IMD, select the «IMD» section:
44 44  
45 45  [[image:1734009713290-935.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="350" width="600"]]
46 46  
... ... @@ -75,7 +75,7 @@
75 75  
76 76  (% class="box infomessage" %)
77 77  (((
78 -To apply new settings please restart the BMS IMD 1.x device.
78 +To apply new settings please restart the BMS IMD device.
79 79  )))
80 80  
81 81  == Reading device status ==
... ... @@ -122,7 +122,7 @@
122 122  
123 123  == Indication of device work ==
124 124  
125 -The BMS IMD 1.x device has two LED indicators MODE and ERR.
125 +The BMS IMD device has two LED indicators MODE and ERR.
126 126  
127 127  The MODE indicator is green and allows you to determine the operating stage of the device by its blinking frequency:
128 128