Skip to Content
Last modified by Admin on 2025/04/09 08:19
From version 8.1
edited by Admin
on 2025/03/18 12:37
Change comment: There is no comment for this version
To version 13.1
edited by Admin
on 2025/04/09 08:19
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -3,9 +3,9 @@
3 3  
4 4  == Safety rules ==
5 5  
6 -Before use, **configure the system**. Proper operation of the BMS is possible only if it is correctly configured.
6 +Before use, **configure the system**. Proper operation of the BMS IMD is possible only if it is correctly configured.
7 7  
8 -(% class="box warningmessage" %)
8 +(% class="box errormessage" %)
9 9  (((
10 10  The BMS can be connected to batteries with life-threatening and health-hazardous voltage levels. When working with high-voltage batteries, observe electrical safety regulations, use safety glasses, protective clothing, insulated tools and appliances. To prevent the damage of device avoid electrostatic discharges while working with the battery.
11 11  )))
... ... @@ -12,7 +12,7 @@
12 12  
13 13  (% class="box errormessage" %)
14 14  (((
15 -**The system is not designed to operate with batteries whose total voltage exceeds 900V.**
15 +The system is not designed to operate with batteries whose total voltage exceeds 900V.
16 16  )))
17 17  
18 18  == Installation ==
... ... @@ -19,10 +19,10 @@
19 19  
20 20  The mounting location must be protected from mechanical obstacles (dust, dirt, large objects) and water. Device placement should provide easy access for connection.
21 21  
22 -[[image:1734009150929-282.png||data-xwiki-image-style-alignment="center" height="414" width="600"]]
22 +[[image:1744186715862-288.png||data-xwiki-image-style-alignment="center" height="421" width="596"]]
23 23  
24 24  |**Parameter**|**Value**
25 -|Overall dimensions (length × width × height), mm|140 × 60 × 14
25 +|Overall dimensions (length × width × height), mm|140 × 60 × 12
26 26  |Mounting dimensions (length × width), mm|130 × 50
27 27  |Mounting holes|M3
28 28  
... ... @@ -44,7 +44,7 @@
44 44  |**1**|**CHASSIS**|Vehicle chassis connection
45 45  |**2**|**CHASSIS**|Vehicle chassis connection
46 46  
47 -=== X2 – header for a top-level controller (rev1.1 only) ===
47 +=== X2 – header for a top-level controller (v1.1 only) ===
48 48  
49 49  Receptacle Housing: Molex 430250800. Terminals: Molex 43030
50 50  
... ... @@ -67,7 +67,7 @@
67 67  The **OUT_ERROR **signal indicates a critical device error or a low insulation resistance value.
68 68  )))
69 69  
70 -=== X2 – header for a top-level controller (rev1.2 only) ===
70 +=== X2 – header for a top-level controller (v1.2 only) ===
71 71  
72 72  Receptacle Housing: Molex 430251200. Terminals: Molex 43030
73 73  
1744186715862-288.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +169.3 KB
Content