Skip to Content
Last modified by Admin on 2025/04/09 08:19
From version 1.1
edited by Admin
on 2024/12/12 13:19
Change comment: There is no comment for this version
To version 12.1
edited by Admin
on 2025/04/09 08:18
Change comment: Uploaded new attachment "1744186715862-288.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -2. Connection
1 +2. Installation and connection
Parent
... ... @@ -1,1 +1,1 @@
1 -drafts.BMS IMD.WebHome
1 +Battery management systems.BMS IMD.WebHome
Content
... ... @@ -1,8 +1,22 @@
1 1  (% data-numbered-headings-start="2" style="--numbered-headings-start: 1;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
2 2  = Connection =
3 3  
4 -== Dimensions ==
4 +== Safety rules ==
5 5  
6 +Before use, **configure the system**. Proper operation of the BMS IMD is possible only if it is correctly configured.
7 +
8 +(% class="box errormessage" %)
9 +(((
10 +The BMS can be connected to batteries with life-threatening and health-hazardous voltage levels. When working with high-voltage batteries, observe electrical safety regulations, use safety glasses, protective clothing, insulated tools and appliances. To prevent the damage of device avoid electrostatic discharges while working with the battery.
11 +)))
12 +
13 +(% class="box errormessage" %)
14 +(((
15 +The system is not designed to operate with batteries whose total voltage exceeds 900V.
16 +)))
17 +
18 +== Installation ==
19 +
6 6  The mounting location must be protected from mechanical obstacles (dust, dirt, large objects) and water. Device placement should provide easy access for connection.
7 7  
8 8  [[image:1734009150929-282.png||data-xwiki-image-style-alignment="center" height="414" width="600"]]
... ... @@ -11,11 +11,10 @@
11 11  |Overall dimensions (length × width × height), mm|140 × 60 × 14
12 12  |Mounting dimensions (length × width), mm|130 × 50
13 13  |Mounting holes|M3
14 -|Header types|Molex series Micro-Fit
15 15  
16 16  == Headers ==
17 17  
18 -The BMS IMD 1.x has two headers for connecting the power line (X3 and X4), a header for connecting external equipment and power supply (X2), a chassis connection header (X1) and a jumper which connects a terminal resistor to the CAN bus (J1).
31 +The BMS IMD has two headers for connecting the power line (X3 and X4), a header for connecting external equipment and power supply (X2), a chassis connection header (X1) and a jumper which connects a terminal resistor to the CAN bus (J1).
19 19  
20 20  [[image:1734009150915-999.png||data-xwiki-image-style-alignment="center" height="267" width="600"]]
21 21  
... ... @@ -22,6 +22,8 @@
22 22  
23 23  === X1 – header for chassis connection ===
24 24  
38 +Receptacle Housing: Molex 430250200. Terminals: Molex 43030
39 +
25 25  [[image:1734009337118-173.png||data-xwiki-image-style-alignment="center"]]
26 26  
27 27  
... ... @@ -31,6 +31,8 @@
31 31  
32 32  === X2 – header for a top-level controller (rev1.1 only) ===
33 33  
49 +Receptacle Housing: Molex 430250800. Terminals: Molex 43030
50 +
34 34  [[image:1734009150925-152.png||data-xwiki-image-style-alignment="center" height="79" width="120"]]
35 35  
36 36  |**Pin**|**Name**|**Description**
... ... @@ -52,6 +52,8 @@
52 52  
53 53  === X2 – header for a top-level controller (rev1.2 only) ===
54 54  
72 +Receptacle Housing: Molex 430251200. Terminals: Molex 43030
73 +
55 55  [[image:1734009150926-839.png||data-xwiki-image-style-alignment="center" height="92" width="198"]]
56 56  
57 57  |**Pin**|**Name**|**Description**
... ... @@ -71,13 +71,15 @@
71 71  (% class="box infomessage" %)
72 72  (((
73 73  **Notes:**
74 -The OUT_WORK signal signals the operation of the device’s main program and is generated when the device is turned on.
75 -The OUT_ERROR signal indicates a critical device error or a low insulation resistance value.
76 -The KEYRUN_1 and KEYRUN_2 signals are equivalent and are intended to trigger the device’s power supply circuit. Can be connected to the V+ device supply line.
93 +The **OUT_WORK **signal signals the operation of the device’s main program and is generated when the device is turned on.
94 +The **OUT_ERROR **signal indicates a critical device error or a low insulation resistance value.
95 +The **KEYRUN_1 **and **KEYRUN_2 **signals are equivalent and are intended to trigger the device’s power supply circuit. Can be connected to the V+ device supply line.
77 77  )))
78 78  
79 79  === X3 – header for positive line connection ===
80 80  
100 +Receptacle Housing: Molex 436450200. Terminals: Molex 43030
101 +
81 81  [[image:1734009150927-865.png||data-xwiki-image-style-alignment="center" height="69" width="88"]]
82 82  
83 83  |**Pin**|**Name**|**Description**
... ... @@ -86,6 +86,8 @@
86 86  
87 87  === X4 – header for negative line connection ===
88 88  
110 +Receptacle Housing: Molex 436450200. Terminals: Molex 43030
111 +
89 89  [[image:1734009150927-865.png||data-xwiki-image-style-alignment="center" height="69" width="88"]]
90 90  
91 91  
1744186715862-288.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +169.3 KB
Content