| ... |
... |
@@ -16,7 +16,7 @@ |
| 16 |
16 |
|Current consumption in the active state, mA, avg|500 |
| 17 |
17 |
|Supported network types|GSM/GPRS/EDGE, NB-IoT |
| 18 |
18 |
|Dimensions (length × width × height), mm|61 × 54 × 15 |
| 19 |
|
-|Weight, g|23 ± 2 |
|
19 |
+|Weight, g|23 ± 5 |
| 20 |
20 |
|(% colspan="2" %)**Operating conditions** |
| 21 |
21 |
|Operating temperature range, ° С|-40 to +85 |
| 22 |
22 |
|Degree of protection from external influences|IP00 |
| ... |
... |
@@ -26,7 +26,8 @@ |
| 26 |
26 |
(% class="box warningmessage" %) |
| 27 |
27 |
((( |
| 28 |
28 |
**Attention** |
| 29 |
|
-Connecting the BMS GSM 1.x is performed to the powered-off BMS controller! |
|
29 |
+Connecting the BMS GSM is performed to the powered-off BMS controller! |
|
30 |
+To prevent the damage of device avoid electrostatic discharges. |
| 30 |
30 |
))) |
| 31 |
31 |
|
| 32 |
32 |
The BMS GSM must be inserted into the corresponding header of the BMS controller. The device must be fixed to the BMS controller by **11mm M3 standoffs** and M3 screws. |
| ... |
... |
@@ -39,11 +39,11 @@ |
| 39 |
39 |
|
| 40 |
40 |
= Configuration = |
| 41 |
41 |
|
| 42 |
|
-Configuring the BMS GSM 1.x must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>path:/bin/view/Battery%20management%20systems/]]. |
|
43 |
+Configuring the BMS GSM must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>path:/bin/view/Battery%20management%20systems/]]. |
| 43 |
43 |
|
| 44 |
44 |
Typically, the connection settings located in the “Connectivity -> GSM” section of the BMS controller. |
| 45 |
45 |
|
| 46 |
|
-(% class="box warningmessage" %) |
|
47 |
+(% class="box infomessage" %) |
| 47 |
47 |
((( |
| 48 |
48 |
To apply new connection settings, it is necessary to restart the BMS controller. |
| 49 |
49 |
))) |
