| ... |
... |
@@ -26,8 +26,7 @@ |
| 26 |
26 |
(% class="box warningmessage" %) |
| 27 |
27 |
((( |
| 28 |
28 |
**Attention** |
| 29 |
|
-Connecting the BMS GSM is performed to the powered-off BMS controller! |
| 30 |
|
-To prevent the damage of device avoid electrostatic discharges. |
|
29 |
+Connecting the BMS GSM 1.x is performed to the powered-off BMS controller! |
| 31 |
31 |
))) |
| 32 |
32 |
|
| 33 |
33 |
The BMS GSM must be inserted into the corresponding header of the BMS controller. The device must be fixed to the BMS controller by **11mm M3 standoffs** and M3 screws. |
| ... |
... |
@@ -40,11 +40,9 @@ |
| 40 |
40 |
|
| 41 |
41 |
= Configuration = |
| 42 |
42 |
|
| 43 |
|
-Configuring the BMS GSM must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>path:/bin/view/Battery%20management%20systems/]]. |
|
42 |
+Configuring the BMS GSM 1.x must be done according to the BMS controller’s configuration manual. Typically, the connection settings located in the “Connectivity -> GSM” section of the BMS controller. |
| 44 |
44 |
|
| 45 |
|
-Typically, the connection settings located in the “Connectivity -> GSM” section of the BMS controller. |
| 46 |
|
- |
| 47 |
|
-(% class="box infomessage" %) |
|
44 |
+(% class="box warningmessage" %) |
| 48 |
48 |
((( |
| 49 |
49 |
To apply new connection settings, it is necessary to restart the BMS controller. |
| 50 |
50 |
))) |
