| ... |
... |
@@ -26,22 +26,24 @@ |
| 26 |
26 |
(% class="box warningmessage" %) |
| 27 |
27 |
((( |
| 28 |
28 |
**Attention** |
| 29 |
|
-Connecting the BMS GSM 1.x is performed to the powered-off BMS controller! |
|
29 |
+Connecting the BMS GSM is performed to the powered-off BMS controller! |
| 30 |
30 |
))) |
| 31 |
31 |
|
| 32 |
32 |
The BMS GSM must be inserted into the corresponding header of the BMS controller. The device must be fixed to the BMS controller by **11mm M3 standoffs** and M3 screws. |
| 33 |
33 |
|
| 34 |
|
-Here is the example of BMS Wi-Fi header on BMS Main X: |
|
34 |
+Here is the example of header for additional devices on BMS Main X: |
| 35 |
35 |
|
| 36 |
|
-[[image:1734099661846-836.png||data-xwiki-image-style-alignment="center" height="423" width="450"]] |
|
36 |
+[[image:1734100655472-941.png||data-xwiki-image-style-alignment="center" height="423" width="450"]] |
| 37 |
37 |
|
| 38 |
38 |
Before configuring the device, a SIM card of the cellular operator must be inserted into the holder on the device board. |
| 39 |
39 |
|
| 40 |
40 |
= Configuration = |
| 41 |
41 |
|
| 42 |
|
-Configuring the BMS GSM 1.x must be done according to the BMS controller’s configuration manual. Typically, the connection settings are in the “Connectivity -> GSM” section of the BMS controller. |
|
42 |
+Configuring the BMS GSM must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>path:/bin/view/Battery%20management%20systems/]]. |
| 43 |
43 |
|
| 44 |
|
-(% class="box warningmessage" %) |
|
44 |
+Typically, the connection settings located in the “Connectivity -> GSM” section of the BMS controller. |
|
45 |
+ |
|
46 |
+(% class="box infomessage" %) |
| 45 |
45 |
((( |
| 46 |
46 |
To apply new connection settings, it is necessary to restart the BMS controller. |
| 47 |
47 |
))) |
