Changes for page 4. Indication

Last modified by Admin on 2025/02/27 15:48

From 7.1 to 7.2 From 7.4 to 7.5

From version 7.2

edited by Admin
on 2024/12/13 16:00

Change comment: Update document after refactoring.

To version 7.4

edited by Admin
on 2025/02/27 15:38

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

@@ -52,53 +52,13 @@
  == Indication of errors ==
--If there are errors selected by the //Errors filter// (see **//Display options //**group), names or codes of errors will be output to the display. In this case a loud sound signal is periodically emitted.
++If there are errors selected by the //Errors filters// (see **//Display options //**group in [[Configuration>>doc:Battery management systems.BMS Display.3\. Configuration.WebHome]]), names or codes of errors will be output to the display. In this case a loud sound signal is periodically emitted.
  [[image:1734103291589-278.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
  [[image:1734103305252-869.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
--If the number of errors is greater than three, a list of errors will be output page by page. Turning pages will be performed automatically every 2 seconds.  It is also available changing pages manually using the button on the device or an external button connected to the P6 header.
++If the number of errors is greater than three, a list of errors will be output page by page. Turning pages will be performed automatically every 2 seconds. It is also available changing pages manually using the button on the device or an external button connected to the P6 header.
--Errors names and codes are in the table below.
++Errors short names and abbreviations for BMS Main 2.1, BMS Mini, B
--|**Error code**|**Error name**|**Description**
--|ACK|Need ACK|Acknowledge of errors is needed
--|ADC|ADC error|Wrong values from the ADC
--|BC|Battery cover|Battery cover is opened
--|CCC|CH cont. cycle|Charge contactor switches too frequency
--|CCF|CH cont. feed.|Wrong feedback signal from the charging contactor
--|CEL|Cell count|Wrong number of cells
--|CER|Critical error|Critical error
--|CHT|Cont. hi. temp.|Hight temperature of a contactor
--|COM|Combilift offl.|No connection with the Combilift forklift
--|CRO|Crown error|Crown forklift error
--|CSE|Current sensor|Current sensor is shorted or opened
--|DCC|DCH cont. cycle|Discharge contactor switches too frequency
--|DCF|DCH cont. feed.|Wrong feedback signal from the discharging contactor
--|FSE|FS error|Filesystem on an SD card is corrupted
--|HCT|High CH temp.|Battery temperature is too high for charging
--|HDT|High DCH temp.|Battery temperature is too high for discharging
--|HH|High humidity|High humidity
--|HYG|HYG offline|No connection with the HYG forklift
--|LCT|Low CH temp.|Battery temperature is too low for charging
--|LDT|Low DCH temp.|Battery temperature is too low for discharging
--|LHT|Logic hi. temp.|Temperature of a BMS Logic board is too high
--|LOF|Logic offline|No connection with a BMS Logic board
--|LOG|Logic count|Wrong number of BMS Logic boards
--|MNT|Mount error|SD card is not mounted
--|NTS|No temp. sens.|No temperature sensors connected to a BMS Logic
--|OC|Overcurrent|High current
--|OV|Overvoltage|High voltage
--|SET|Settings error|Checksum of settings is wrong
--|SHC|Short circuit|Short circuit
--|SHE|Shunt error|Internal error of the shunt sensor
--|SHO|Shunt offline|No connection with the shunt sensor
--|SPI|Spirit offline|No connection with the Spirit truck
--|STC|Stuck contactor|Contactor is stuck
--|TSS|Shorted temp.|A temperature sensor connected to a BMS Logic is shorted
--|UCH|Unallowable CH|Charging the battery through the discharging circuit
--|UV|Undervoltage|Low voltage
--|WA|Water|Water in the battery
--|WDT|WDT reset|Watchdog timer reset the BMS
--

Changes for page 4. Indication

Summary

Details

Applications

Navigation

Table of Contents