Changes for page 4. Indication

Last modified by Admin on 2025/02/27 15:48

From 2.1 to 1.1 From 5.1 to 4.1

From version 4.1

edited by Admin
on 2024/12/13 15:24

Change comment: There is no comment for this version

To version 2.1

edited by Admin
on 2024/12/13 15:23

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

@@ -64,44 +64,44 @@
  Errors names and codes are in the table below.
--|**Error code**|**Error name**|**Description**
--|ACK|Need ACK|Acknowledge of errors is needed
--|ADC|ADC error|Wrong values from the ADC
--|BC|Battery cover|Battery cover is opened
--|CCC|CH cont. cycle|Charge contactor switches too frequency
--|CCF|CH cont. feed.|Wrong feedback signal from the charging contactor
--|CEL|Cell count|Wrong number of cells
--|CER|Critical error|Critical error
--|CHT|Cont. hi. temp.|Hight temperature of a contactor
--|COM|Combilift offl.|No connection with the Combilift forklift
--|CRO|Crown error|Crown forklift error
--|CSE|Current sensor|Current sensor is shorted or opened
--|DCC|DCH cont. cycle|Discharge contactor switches too frequency
--|DCF|DCH cont. feed.|Wrong feedback signal from the discharging contactor
--|FSE|FS error|Filesystem on an SD card is corrupted
--|HCT|High CH temp.|Battery temperature is too high for charging
--|HDT|High DCH temp.|Battery temperature is too high for discharging
--|HH|High humidity|High humidity
--|HYG|HYG offline|No connection with the HYG forklift
--|LCT|Low CH temp.|Battery temperature is too low for charging
--|LDT|Low DCH temp.|Battery temperature is too low for discharging
--|LHT|Logic hi. temp.|Temperature of a BMS Logic board is too high
--|LOF|Logic offline|No connection with a BMS Logic board
--|LOG|Logic count|Wrong number of BMS Logic boards
--|MNT|Mount error|SD card is not mounted
--|NTS|No temp. sens.|No temperature sensors connected to a BMS Logic
--|OC|Overcurrent|High current
--|OV|Overvoltage|High voltage
--|SET|Settings error|Checksum of settings is wrong
--|SHC|Short circuit|Short circuit
--|SHE|Shunt error|Internal error of the shunt sensor
--|SHO|Shunt offline|No connection with the shunt sensor
--|SPI|Spirit offline|No connection with the Spirit truck
--|STC|Stuck contactor|Contactor is stuck
--|TSS|Shorted temp.|A temperature sensor connected to a BMS Logic is shorted
--|UCH|Unallowable CH|Charging the battery through the discharging circuit
--|UV|Undervoltage|Low voltage
--|WA|Water|Water in the battery
--|WDT|WDT reset|Watchdog timer reset the BMS
++|**Error name**|**Error code**|**Description**
++|Overcurrent|OC|High current
++|Undervoltage|UV|Low voltage
++|Overvoltage|OV|High voltage
++|Low DCH temp.|LDT|Battery temperature is too low for discharging
++|High DCH temp.|HDT|Battery temperature is too high for discharging
++|Battery cover|BC|Battery cover is opened
++|High humidity|HH|High humidity
++|Water|WA|Water in the battery
++|Logic hi. temp.|LHT|Temperature of a BMS Logic board is too high
++|Logic offline|LOF|No connection with a BMS Logic board
++|Critical error|CER|Critical error
++|Crown error|CRO|Crown forklift error
++|Cell count|CEL|Wrong number of cells
++|HYG offline|HYG|No connection with the HYG forklift
++|Need ACK|ACK|Acknowledge of errors is needed
++|Combilift offl.|COM|No connection with the Combilift forklift
++|Short circuit|SHC|Short circuit
++|Cont. hi. temp.|CHT|Hight temperature of a contactor
++|Logic count|LOG|Wrong number of BMS Logic boards
++|ADC error|ADC|Wrong values from the ADC
++|Current sensor|CSE|Current sensor is shorted or opened
++|CH cont. cycle|CCC|Charge contactor switches too frequency
++|DCH cont. cycle|DCC|Discharge contactor switches too frequency
++|Shunt offline|SHO|No connection with the shunt sensor
++|Shunt error|SHE|Internal error of the shunt sensor
++|Settings error|SET|Checksum of settings is wrong
++|WDT reset|WDT|Watchdog timer reset the BMS
++|No temp. sens.|NTS|No temperature sensors connected to a BMS Logic
++|Shorted temp.|TSS|A temperature sensor connected to a BMS Logic is shorted
++|Spirit offline|SPI|No connection with the Spirit truck
++|Low CH temp.|LCT|Battery temperature is too low for charging
++|High CH temp.|HCT|Battery temperature is too high for charging
++|Mount error|MNT|SD card is not mounted
++|FS error|FSE|Filesystem on an SD card is corrupted
++|Unallowable CH|UCH|Charging the battery through the discharging circuit
++|Stuck contactor|STC|Contactor is stuck
++|CH cont. feed.|CCF|Wrong feedback signal from the charging contactor
++|DCH cont. feed.|DCF|Wrong feedback signal from the discharging contactor

Changes for page 4. Indication

Summary

Details

Applications

Navigation

Table of Contents