Changes for page 4. Indication

Last modified by Admin on 2025/02/27 15:48

From 1.1 to 2.1 From 4.1 to 5.1

From version 2.1

edited by Admin
on 2024/12/13 15:23

Change comment: There is no comment for this version

To version 4.1

edited by Admin
on 2024/12/13 15:24

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

@@ -64,44 +64,44 @@
  Errors names and codes are in the table below.
--|**Error name**|**Error code**|**Description**
--|Overcurrent|OC|High current
--|Undervoltage|UV|Low voltage
--|Overvoltage|OV|High voltage
--|Low DCH temp.|LDT|Battery temperature is too low for discharging
--|High DCH temp.|HDT|Battery temperature is too high for discharging
--|Battery cover|BC|Battery cover is opened
--|High humidity|HH|High humidity
--|Water|WA|Water in the battery
--|Logic hi. temp.|LHT|Temperature of a BMS Logic board is too high
--|Logic offline|LOF|No connection with a BMS Logic board
--|Critical error|CER|Critical error
--|Crown error|CRO|Crown forklift error
--|Cell count|CEL|Wrong number of cells
--|HYG offline|HYG|No connection with the HYG forklift
--|Need ACK|ACK|Acknowledge of errors is needed
--|Combilift offl.|COM|No connection with the Combilift forklift
--|Short circuit|SHC|Short circuit
--|Cont. hi. temp.|CHT|Hight temperature of a contactor
--|Logic count|LOG|Wrong number of BMS Logic boards
--|ADC error|ADC|Wrong values from the ADC
--|Current sensor|CSE|Current sensor is shorted or opened
--|CH cont. cycle|CCC|Charge contactor switches too frequency
--|DCH cont. cycle|DCC|Discharge contactor switches too frequency
--|Shunt offline|SHO|No connection with the shunt sensor
--|Shunt error|SHE|Internal error of the shunt sensor
--|Settings error|SET|Checksum of settings is wrong
--|WDT reset|WDT|Watchdog timer reset the BMS
--|No temp. sens.|NTS|No temperature sensors connected to a BMS Logic
--|Shorted temp.|TSS|A temperature sensor connected to a BMS Logic is shorted
--|Spirit offline|SPI|No connection with the Spirit truck
--|Low CH temp.|LCT|Battery temperature is too low for charging
--|High CH temp.|HCT|Battery temperature is too high for charging
--|Mount error|MNT|SD card is not mounted
--|FS error|FSE|Filesystem on an SD card is corrupted
--|Unallowable CH|UCH|Charging the battery through the discharging circuit
--|Stuck contactor|STC|Contactor is stuck
--|CH cont. feed.|CCF|Wrong feedback signal from the charging contactor
--|DCH cont. feed.|DCF|Wrong feedback signal from the discharging contactor
++|**Error code**|**Error name**|**Description**
++|ACK|Need ACK|Acknowledge of errors is needed
++|ADC|ADC error|Wrong values from the ADC
++|BC|Battery cover|Battery cover is opened
++|CCC|CH cont. cycle|Charge contactor switches too frequency
++|CCF|CH cont. feed.|Wrong feedback signal from the charging contactor
++|CEL|Cell count|Wrong number of cells
++|CER|Critical error|Critical error
++|CHT|Cont. hi. temp.|Hight temperature of a contactor
++|COM|Combilift offl.|No connection with the Combilift forklift
++|CRO|Crown error|Crown forklift error
++|CSE|Current sensor|Current sensor is shorted or opened
++|DCC|DCH cont. cycle|Discharge contactor switches too frequency
++|DCF|DCH cont. feed.|Wrong feedback signal from the discharging contactor
++|FSE|FS error|Filesystem on an SD card is corrupted
++|HCT|High CH temp.|Battery temperature is too high for charging
++|HDT|High DCH temp.|Battery temperature is too high for discharging
++|HH|High humidity|High humidity
++|HYG|HYG offline|No connection with the HYG forklift
++|LCT|Low CH temp.|Battery temperature is too low for charging
++|LDT|Low DCH temp.|Battery temperature is too low for discharging
++|LHT|Logic hi. temp.|Temperature of a BMS Logic board is too high
++|LOF|Logic offline|No connection with a BMS Logic board
++|LOG|Logic count|Wrong number of BMS Logic boards
++|MNT|Mount error|SD card is not mounted
++|NTS|No temp. sens.|No temperature sensors connected to a BMS Logic
++|OC|Overcurrent|High current
++|OV|Overvoltage|High voltage
++|SET|Settings error|Checksum of settings is wrong
++|SHC|Short circuit|Short circuit
++|SHE|Shunt error|Internal error of the shunt sensor
++|SHO|Shunt offline|No connection with the shunt sensor
++|SPI|Spirit offline|No connection with the Spirit truck
++|STC|Stuck contactor|Contactor is stuck
++|TSS|Shorted temp.|A temperature sensor connected to a BMS Logic is shorted
++|UCH|Unallowable CH|Charging the battery through the discharging circuit
++|UV|Undervoltage|Low voltage
++|WA|Water|Water in the battery
++|WDT|WDT reset|Watchdog timer reset the BMS

Changes for page 4. Indication

Summary

Details

Applications

Navigation

Table of Contents