Skip to Content

Changes for page 3. Configuration

Last modified by Admin on 2025/02/27 16:44
From version 4.4
edited by Admin
on 2025/02/27 15:09
Change comment: There is no comment for this version
To version 4.2
edited by Admin
on 2025/02/27 15:08
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -62,7 +62,7 @@
62 62  * Disable buzzer – a flag for turning off the buzzer;
63 63  * Errors filter – a filter of errors that should be output to the display.
64 64  
65 -**BMS Main 2 errors filter 1**, **BMS Main 2 errors filter 2 **and **BMS Main X errors filter** are a 32-bit words which are written in the hexadecimal notation. Each bit of the word corresponds to an error. If the bit is set to “1”, the device signals about the error corresponding this bit.
65 +BMS Main Errors filter is a 32-bit word which is written in the hexadecimal notation. Each bit of the word corresponds to an error. If the bit is set to “1”, the device signals about the error corresponding this bit. The list of bits and errors is in the table below.
66 66  
67 67  |**Bit number**|**Error**
68 68  |**0**|Overcurrent