Wiki source code of 2. Installation and connection
Last modified by Admin on 2025/03/18 12:35
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
1.1 | 1 | (% data-numbered-headings-start="2" style="--numbered-headings-start: 1;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %) |
| 2 | = Installation and connection = | ||
| 3 | |||
| |
8.2 | 4 | == Safety rules == |
| 5 | |||
| 6 | (% class="wikigeneratedid" %) | ||
| |
9.1 | 7 | Before use, **configure the system**. Proper operation of the device is possible only if it is correctly configured. |
| |
8.2 | 8 | |
| 9 | (% class="box warningmessage" %) | ||
| 10 | ((( | ||
| 11 | To prevent the damage of device avoid electrostatic discharges while working with the battery. | ||
| 12 | ))) | ||
| 13 | |||
| |
1.1 | 14 | == Installation == |
| 15 | |||
| 16 | [[image:1734102043915-364.png||data-xwiki-image-style-alignment="center" height="355" width="600"]] | ||
| 17 | |||
| 18 | |**Parameter**|**Value** | ||
| 19 | |Overall dimensions (length × width × height), mm|140 × 37 × 23 | ||
| 20 | |Mounting dimensions (length × width), mm|134 × 31 | ||
| 21 | |Mounting holes|M3 | ||
| 22 | |||
| |
5.1 | 23 | == Headers == |
| |
1.1 | 24 | |
| 25 | The BMS Display has three headers for connecting the BMS (P3, P4 и P5), a header for an external button (P6) and a switch which connects a terminal resistor to the CAN bus (SWD1). | ||
| 26 | |||
| 27 | === P3, P4 and P5 – headers for communication with BMS === | ||
| 28 | |||
| |
8.1 | 29 | Receptacle Housing: Molex 430250400. Terminals: Molex 43030 |
| |
5.3 | 30 | |
| |
1.1 | 31 | [[image:1734102177551-232.png||data-xwiki-image-style-alignment="center" height="77" width="73"]] |
| 32 | |||
| 33 | |**Pin**|**Name**|**Description** | ||
| 34 | |**1**|**CANH**|CAN H line for communication with the BMS controller | ||
| 35 | |**2**|**CANL**|CAN L line for communication with the BMS controller | ||
| |
6.1 | 36 | |**3**|**+5V**|Supply voltage 5V |
| |
1.1 | 37 | |**4**|**GND**|Ground |
| 38 | |||
| |
4.1 | 39 | === P6 – header for external button === |
| |
1.1 | 40 | |
| |
8.1 | 41 | Receptacle Housing: Molex 430250200. Terminals: Molex 43030 |
| |
5.3 | 42 | |
| |
4.1 | 43 | [[image:1734102225110-114.png||data-xwiki-image-style-alignment="center" height="79" width="44"]] |
| 44 | |||
| |
1.1 | 45 | |**Pin**|**Name**|**Description** |
| 46 | |**1**|**BTN1**|Button line (dry contact) | ||
| 47 | |**2**|**BTN2**|Button line (dry contact) | ||
| 48 | |||
| 49 | === SWD1 - CAN terminal resistor switch === | ||
| 50 | |||
| 51 | To connect the terminal resistor between the **CANH** and **CANL** lines, switch the SWD1 to the ON position. |