Skip to Content
Last modified by Admin on 2025/03/18 12:35
From version 7.1
edited by Admin
on 2025/02/20 12:42
Change comment: There is no comment for this version
To version 2.1
edited by Admin
on 2024/12/13 15:04
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -Battery management systems.BMS Display.WebHome
1 +drafts.BMS Display.WebHome
Content
... ... @@ -9,29 +9,24 @@
9 9  |Overall dimensions (length × width × height), mm|140 × 37 × 23
10 10  |Mounting dimensions (length × width), mm|134 × 31
11 11  |Mounting holes|M3
12 +|Header types|Molex series Micro-Fit
12 12  
13 -== Headers ==
14 +== Connection ==
14 14  
15 15  The BMS Display has three headers for connecting the BMS (P3, P4 и P5), a header for an external button (P6) and a switch which connects a terminal resistor to the CAN bus (SWD1).
16 16  
17 17  === P3, P4 and P5 – headers for communication with BMS ===
18 18  
19 -Receptacle Housing: Molex 430250400. Terminals: 43030
20 -
21 21  [[image:1734102177551-232.png||data-xwiki-image-style-alignment="center" height="77" width="73"]]
22 22  
23 23  |**Pin**|**Name**|**Description**
24 24  |**1**|**CANH**|CAN H line for communication with the BMS controller
25 25  |**2**|**CANL**|CAN L line for communication with the BMS controller
26 -|**3**|**+5V**|Supply voltage 5V
25 +|**3**|**+5V**|Supply voltage 5 V
27 27  |**4**|**GND**|Ground
28 28  
29 -=== P6 – header for external button ===
28 +=== P6 – header for external button[[image:1734102225110-114.png||data-xwiki-image-style-alignment="center" height="79" width="44"]] ===
30 30  
31 -Receptacle Housing: Molex 430250200. Terminals: 43030
32 -
33 -[[image:1734102225110-114.png||data-xwiki-image-style-alignment="center" height="79" width="44"]]
34 -
35 35  |**Pin**|**Name**|**Description**
36 36  |**1**|**BTN1**|Button line (dry contact)
37 37  |**2**|**BTN2**|Button line (dry contact)