Wiki source code of Battery controllers: signals, states and errors

Version 28.5 by Admin on 2025/02/06 16:58

version	line-number	content
1.1	1	(% data-numbered-headings-start="1" style="--numbered-headings-start: 0;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
13.1	2	= Signals, states and errors =
1.1	3
16.2	4	== Input signals ==
1.1	5
16.2	6	Below is the list of input signals that can be assigned to discrete inputs of the BMS controller.
9.30	7
28.1	8	* Remote control values: Off = 0, On = 1, Use physical input = 2-65535.
	9	* Status values: Off = 0, On = 1.
4.16	10
28.1	11	(% style="width:1553px" %)
	12	\|=(% colspan="1" rowspan="2" style="width: 197px;" %)Name\|=(% colspan="1" rowspan="2" style="width: 409px;" %)Description\|=(% colspan="3" rowspan="1" style="width: 251px;" %)Compatibility\|=(% colspan="2" rowspan="1" style="width: 170px;" %)BMS Display\|=(% colspan="2" rowspan="1" style="width: 213px;" %)Remote control\|=(% colspan="2" rowspan="1" style="width: 282px;" %)Status
	13	\|=(% style="width: 96px;" %)Mini S / Mini\|=(% style="width: 83px;" %)Main 2.1\|=(% style="width: 71px;" %)Main 3\|=(% colspan="1" style="width: 125px;" %)Short name\|=(% style="width: 45px;" %)Abbr.\|=(% colspan="1" style="width: 132px;" %)CANopen SDO\|=(% colspan="1" style="width: 81px;" %)Modbus\|=(% style="width: 159px;" %)CANopen SDO\|=(% style="width: 123px;" %)Modbus
	14	\|(% style="width:197px" %)Balancing request\|(% style="width:409px" %)Request to balance the cells\|(% style="width:96px" %)Yes\|(% style="width:83px" %)Yes\|(% style="width:71px" %)Yes\|(% style="width:125px" %)Balancing req.\|(% style="width:45px" %)BR\|(% style="width:132px" %)0x5100, sub 0x14\|(% style="width:81px" %)0x5113\|(% style="width:159px" %)0x4030 sub 0x00, bit 3\|(% style="width:123px" %)0x2000, bit 3
	15	\|(% style="width:197px" %)Battery cover\|(% style="width:409px" %)Signal from the battery cover\|(% style="width:96px" %)Yes\|(% style="width:83px" %)Yes\|(% style="width:71px" %)Yes\|(% style="width:125px" %)Battery cover\|(% style="width:45px" %)CVR\|(% style="width:132px" %)0x5100, sub 0x01\|(% style="width:81px" %)0x5100\|(% style="width:159px" %)0x4030 sub 0x00, bit 0\|(% style="width:123px" %)0x2000, bit 0
	16	\|(% style="width:197px" %)CH contactor feedback\|(% style="width:409px" %)Signal from the charging contactor feedback loop\|(% style="width:96px" %)Yes*\|(% style="width:83px" %)Yes\|(% style="width:71px" %)Yes\|(% style="width:125px" %)CH cont. feed.\|(% style="width:45px" %)CCF\|(% style="width:132px" %)0x5100, sub 0x06\|(% style="width:81px" %)0x5105\|(% style="width:159px" %)0x4030 sub 0x00, bit 5\|(% style="width:123px" %)0x2000, bit 5
	17	\|(% style="width:197px" %)CH/DCH contactor feedback\|(% style="width:409px" %)Signal from the charging/discharging contactor feedback loop\|(% style="width:96px" %)Yes*\|(% style="width:83px" %)Yes\|(% style="width:71px" %)Yes\|(% style="width:125px" %)C/D cont. feed.\|(% style="width:45px" %)CDF\|(% style="width:132px" %)0x5100, sub 0x0D\|(% style="width:81px" %)0x510C\|(% style="width:159px" %)0x4030 sub 0x00, bit 12\|(% style="width:123px" %)0x2000, bit 12
	18	\|(% style="width:197px" %)Charge request\|(% style="width:409px" %)Request to close the charging contactor\|(% style="width:96px" %)Yes\|(% style="width:83px" %)Yes\|(% style="width:71px" %)Yes\|(% style="width:125px" %)Charge request\|(% style="width:45px" %)CRE\|(% style="width:132px" %)0x5100, sub 0x09\|(% style="width:81px" %)0x5108\|(% style="width:159px" %)0x4030 sub 0x00, bit 8\|(% style="width:123px" %)0x2000, bit 8
	19	\|(% style="width:197px" %)Charger connected\|(% style="width:409px" %)Signal indicating that the charger is connected\|(% style="width:96px" %)Yes\|(% style="width:83px" %)Yes\|(% style="width:71px" %)Yes\|(% style="width:125px" %)Charger connect.\|(% style="width:45px" %)CON\|(% style="width:132px" %)0x5100, sub 0x02\|(% style="width:81px" %)0x5101\|(% style="width:159px" %)0x4030 sub 0x00, bit 1\|(% style="width:123px" %)0x2000, bit 1
	20	\|(% style="width:197px" %)Circuit breaker status\|(% style="width:409px" %)Status of protective disconnector\|(% style="width:96px" %)Yes\|(% style="width:83px" %)Yes\|(% style="width:71px" %)Yes\|(% style="width:125px" %)Circuit breaker\|(% style="width:45px" %)CBS\|(% style="width:132px" %)0x5100, sub 0x13\|(% style="width:81px" %)0x5112\|(% style="width:159px" %)0x4030 sub 0x00, bit 2\|(% style="width:123px" %)0x20F4, bit 2
	21	\|(% style="width:197px" %)Close External 1\|(% style="width:409px" %)Request to set the External 1 signal\|(% style="width:96px" %)Yes\|(% style="width:83px" %)Yes\|(% style="width:71px" %)Yes\|(% style="width:125px" %)Close Ext.1\|(% style="width:45px" %)CE1\|(% style="width:132px" %)0x5100, sub 0x16\|(% style="width:81px" %)0x5115\|(% style="width:159px" %)0x4030 sub 0x00, bit 5\|(% style="width:123px" %)0x20F4, bit 5
	22	\|(% style="width:197px" %)Close Main contactor\|(% style="width:409px" %)Request to close the main contactor\|(% style="width:96px" %)Yes\|(% style="width:83px" %)Yes\|(% style="width:71px" %)Yes\|(% style="width:125px" %)Close Main cont.\|(% style="width:45px" %)CMC\|(% style="width:132px" %)0x5100, sub 0x15\|(% style="width:81px" %)0x5114\|(% style="width:159px" %)0x4030 sub 0x00, bit 4\|(% style="width:123px" %)0x20F4, bit 4
	23	\|(% style="width:197px" %)DCH contactor feedback\|(% style="width:409px" %)Signal from the discharging contactor feedback loop\|(% style="width:96px" %)Yes*\|(% style="width:83px" %)Yes\|(% style="width:71px" %)Yes\|(% style="width:125px" %)DCH cont. feed.\|(% style="width:45px" %)DCF\|(% style="width:132px" %)0x5100, sub 0x07\|(% style="width:81px" %)0x5106\|(% style="width:159px" %)0x4030 sub 0x00, bit 6\|(% style="width:123px" %)0x2000, bit 6
	24	\|(% style="width:197px" %)Discharge request\|(% style="width:409px" %)Request to close the discharging contactor\|(% style="width:96px" %)Yes\|(% style="width:83px" %)Yes\|(% style="width:71px" %)Yes\|(% style="width:125px" %)Discharge req.\|(% style="width:45px" %)DRE\|(% style="width:132px" %)0x5100, sub 0x0B\|(% style="width:81px" %)0x510A\|(% style="width:159px" %)0x4030 sub 0x00, bit 10\|(% style="width:123px" %)0x2000, bit 10
	25	\|(% style="width:197px" %)Fuse 1\|(% style="width:409px" %)Signal from fuse 1\|(% style="width:96px" %)Yes\|(% style="width:83px" %)Yes\|(% style="width:71px" %)Yes\|(% style="width:125px" %)Fuse 1\|(% style="width:45px" %)F1\|(% style="width:132px" %)0x5100, sub 0x10\|(% style="width:81px" %)0x510F\|(% style="width:159px" %)0x4030 sub 0x00, bit 15\|(% style="width:123px" %)0x2000, bit 15
	26	\|(% style="width:197px" %)Fuse 2\|(% style="width:409px" %)Signal from fuse 2\|(% style="width:96px" %)Yes\|(% style="width:83px" %)Yes\|(% style="width:71px" %)Yes\|(% style="width:125px" %)Fuse 2\|(% style="width:45px" %)F2\|(% style="width:132px" %)0x5100, sub 0x11\|(% style="width:81px" %)0x5110\|(% style="width:159px" %)0x4030 sub 0x00, bit 0\|(% style="width:123px" %)0x20F4, bit 0
	27	\|(% style="width:197px" %)Fuse 3\|(% style="width:409px" %)Signal from fuse 3\|(% style="width:96px" %)Yes\|(% style="width:83px" %)Yes\|(% style="width:71px" %)Yes\|(% style="width:125px" %)Fuse 3\|(% style="width:45px" %)F3\|(% style="width:132px" %)0x5100, sub 0x12\|(% style="width:81px" %)0x5111\|(% style="width:159px" %)0x4030 sub 0x00, bit 1\|(% style="width:123px" %)0x20F4, bit 1
	28	\|(% style="width:197px" %)Inhibit charging\|(% style="width:409px" %)Command to open the charging contactor\|(% style="width:96px" %)Yes\|(% style="width:83px" %)Yes\|(% style="width:71px" %)Yes\|(% style="width:125px" %)Inhibit charg.\|(% style="width:45px" %)ICH\|(% style="width:132px" %)0x5100, sub 0x04\|(% style="width:81px" %)0x5103\|(% style="width:159px" %)0x4030 sub 0x00, bit 3\|(% style="width:123px" %)0x2000, bit 3
	29	\|(% style="width:197px" %)Inhibit discharging\|(% style="width:409px" %)Command to open the discharging contactor\|(% style="width:96px" %)Yes\|(% style="width:83px" %)Yes\|(% style="width:71px" %)Yes\|(% style="width:125px" %)Inhibit disch.\|(% style="width:45px" %)IDC\|(% style="width:132px" %)0x5100, sub 0x05\|(% style="width:81px" %)0x5104\|(% style="width:159px" %)0x4030 sub 0x00, bit 4\|(% style="width:123px" %)0x2000, bit 4
	30	\|(% style="width:197px" %)Insulation status\|(% style="width:409px" %)Signal from an insulation monitoring device\|(% style="width:96px" %)Yes\|(% style="width:83px" %)Yes\|(% style="width:71px" %)Yes\|(% style="width:125px" %)Insul. status\|(% style="width:45px" %)INS\|(% style="width:132px" %)0x5100, sub 0x08\|(% style="width:81px" %)0x5107\|(% style="width:159px" %)0x4030 sub 0x00, bit 7\|(% style="width:123px" %)0x2000, bit 7
	31	\|(% style="width:197px" %)Interlock\|(% style="width:409px" %)Signal from the interlock loop\|(% style="width:96px" %)Yes\|(% style="width:83px" %)Yes\|(% style="width:71px" %)Yes\|(% style="width:125px" %)Interlock\|(% style="width:45px" %)INT\|(% style="width:132px" %)0x5100, sub 0x0F\|(% style="width:81px" %)0x510E\|(% style="width:159px" %)0x4030 sub 0x00, bit 14\|(% style="width:123px" %)0x2000, bit 14
	32	\|(% style="width:197px" %)Main contactor feedback\|(% style="width:409px" %)Signal from the main contactor feedback loop\|(% style="width:96px" %)Yes*\|(% style="width:83px" %)Yes\|(% style="width:71px" %)Yes\|(% style="width:125px" %)Main cont. feed.\|(% style="width:45px" %)MCF\|(% style="width:132px" %)0x5100, sub 0x0E\|(% style="width:81px" %)0x510D\|(% style="width:159px" %)0x4030 sub 0x00, bit 13\|(% style="width:123px" %)0x2000, bit 13
	33	\|(% style="width:197px" %)PCH contactor feedback\|(% style="width:409px" %)Signal from the precharging contactor feedback loop\|(% style="width:96px" %)Yes*\|(% style="width:83px" %)Yes\|(% style="width:71px" %)Yes\|(% style="width:125px" %)PCH cont. feed.\|(% style="width:45px" %)PCF\|(% style="width:132px" %)0x5100, sub 0x0C\|(% style="width:81px" %)0x510B\|(% style="width:159px" %)0x4030 sub 0x00, bit 11\|(% style="width:123px" %)0x2000, bit 11
	34	\|(% style="width:197px" %)Power up/down request\|(% style="width:409px" %)Request to power down the device\|(% style="width:96px" %)Yes\|(% style="width:83px" %)Yes\|(% style="width:71px" %)Yes\|(% style="width:125px" %)Power down req.\|(% style="width:45px" %)PDN\|(% style="width:132px" %)0x5100, sub 0x03\|(% style="width:81px" %)0x5102\|(% style="width:159px" %)0x4030 sub 0x00, bit 2\|(% style="width:123px" %)0x2000, bit 2
	35	\|(% style="width:197px" %)Precharge request\|(% style="width:409px" %)Request to close the precharging contactor\|(% style="width:96px" %)Yes\|(% style="width:83px" %)Yes\|(% style="width:71px" %)Yes\|(% style="width:125px" %)Precharge req.\|(% style="width:45px" %)PRE\|(% style="width:132px" %)0x5100, sub 0x0A\|(% style="width:81px" %)0x5109\|(% style="width:159px" %)0x4030 sub 0x00, bit 9\|(% style="width:123px" %)0x2000, bit 9
	36
9.21	37	(% class="wikigeneratedid" %)
9.28	38	~* Contactor feedback signals in BMS Mini / BMS Mini S are connected to [[X1 header>>doc:Battery management systems.BMS Mini S.2\. Installation and connection.WebHome\|\|anchor="HHeaders"]] and configured in "Signals → MOSFETs → Contactors feedback" section.
9.21	39
16.2	40	== Internal signals ==
1.27	41
24.9	42	Below is the list of internal BMS signals. Most signals can be assigned to discrete outputs and/or relays.
9.31	43
28.1	44	* Status values: Off = 0, On = 1.
	45
26.13	46	(% style="width:1529px" %)
28.5	47	\|=(% colspan="1" rowspan="2" style="width: 167px;" %)Name\|=(% colspan="1" rowspan="2" style="width: 387px;" %)Description\|=(% colspan="3" rowspan="1" style="width: 311px;" %)Compatibility\|=(% colspan="2" rowspan="1" style="width: 170px;" %)BMS Display\|=(% colspan="2" rowspan="1" style="width: 487px;" %)Status
	48	\|=(% style="width: 157px;" %)Mini S / Mini\|=(% style="width: 76px;" %)Main 2.1\|=(% style="width: 78px;" %)Main 3\|=(% colspan="1" style="width: 120px;" %)Short name\|=(% style="width: 50px;" %)Abbr.\|=(% colspan="1" style="width: 237px;" %)CANopen SDO\|=(% colspan="1" style="width: 250px;" %)Modbus
	49	\|(% style="width:167px" %)Allow charging\|(% style="width:387px" %)Command for a charger to start charging\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes\|(% style="width:120px" %)Allow charging\|(% style="width:50px" %)ACH\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 3
	50	\|(% style="width:167px" %)Balancing 1\|(% style="width:387px" %)Command to balance the first series of cells\|(% style="width:157px" %) \|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes\|(% style="width:120px" %)Balancing 1\|(% style="width:50px" %)BA1\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 15
	51	\|(% style="width:167px" %)Balancing 2\|(% style="width:387px" %)Command to balance the second series of cells\|(% style="width:157px" %) \|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes\|(% style="width:120px" %)Balancing 2\|(% style="width:50px" %)BA2\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 16
	52	\|(% style="width:167px" %)Cell analysis\|(% style="width:387px" %)Signal indicating cell analysis process\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes*\|(% style="width:120px" %)Cell analysis\|(% style="width:50px" %)CEA\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 14
	53	\|(% style="width:167px" %)Charging current present\|(% style="width:387px" %)Signal showing the presence of the charging current\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes*\|(% style="width:78px" %)Yes\|(% style="width:120px" %)CH curr. present\|(% style="width:50px" %)CCP\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 4
	54	\|(% style="width:167px" %)Charging\|(% style="width:387px" %)Command to control the charging contactor\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes\|(% style="width:120px" %)Charging\|(% style="width:50px" %)CH\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 2
	55	\|(% style="width:167px" %)Charging/Discharging\|(% style="width:387px" %)Command to control the charging/discharging contactor\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes\|(% style="width:120px" %)Charg./Discharg.\|(% style="width:50px" %)C/D\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 22
	56	\|(% style="width:167px" %)Cooler\|(% style="width:387px" %)Command to control the cooler\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes\|(% style="width:120px" %)Cooler\|(% style="width:50px" %)COO\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 9
	57	\|(% style="width:167px" %)Crown EWS\|(% style="width:387px" %) \|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes*\|(% style="width:120px" %)Crown EWS\|(% style="width:50px" %)EWS\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 19
	58	\|(% style="width:167px" %)Discharging (AUX)\|(% style="width:387px" %)Command to control the auxiliary discharging contactor\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes\|(% style="width:120px" %)Disch. AUX\|(% style="width:50px" %)AUX\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 17
	59	\|(% style="width:167px" %)Discharging current present\|(% style="width:387px" %)Signal showing the presence of the discharging current\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes*\|(% style="width:78px" %)Yes\|(% style="width:120px" %)DCH cur. present\|(% style="width:50px" %)DCP\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 6
	60	\|(% style="width:167px" %)Discharging\|(% style="width:387px" %)Command to control the discharging contactor\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes\|(% style="width:120px" %)Discharging\|(% style="width:50px" %)DCH\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 5
	61	\|(% style="width:167px" %)External 1\|(% style="width:387px" %)Command to control an external scheme\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes\|(% style="width:120px" %)External 1\|(% style="width:50px" %)EX1\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 26
	62	\|(% style="width:167px" %)Heater (AUX)\|(% style="width:387px" %)Command to control the auxiliary heater\|(% style="width:157px" %) \|(% style="width:76px" %)Yes\|(% style="width:78px" %) \|(% style="width:120px" %)Heater (AUX)\|(% style="width:50px" %)HAU\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 27
	63	\|(% style="width:167px" %)Heater\|(% style="width:387px" %)Command to control the heater\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes\|(% style="width:120px" %)Heater\|(% style="width:50px" %)HEA\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 8
	64	\|(% style="width:167px" %)High charging current\|(% style="width:387px" %)Signal indicating that the charging current is high\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes\|(% style="width:120px" %)High ch. curr.\|(% style="width:50px" %)HCC\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 1
	65	\|(% style="width:167px" %)Init\|(% style="width:387px" %)Signal showing that the device is in the initialization phase\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes*\|(% style="width:120px" %)Init\|(% style="width:50px" %)INI\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 11
	66	\|(% style="width:167px" %)Low SOC\|(% style="width:387px" %)Signal indicatiing that the battery has low SOC\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes\|(% style="width:120px" %)Low SOC\|(% style="width:50px" %)LOS\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 0
	67	\|(% style="width:167px" %)Main contactor\|(% style="width:387px" %)Command to control the main contactor\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes\|(% style="width:120px" %)Main contactor\|(% style="width:50px" %)MCO\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 20
	68	\|(% style="width:167px" %)Power down ACK\|(% style="width:387px" %)Command that acknowledges the BMS power down. Acknowledgement is outputted when the charge and discharge contactors have been opened on the power down request\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes\|(% style="width:120px" %)Power down ACK\|(% style="width:50px" %)PDA\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 18
	69	\|(% style="width:167px" %)Power up\|(% style="width:387px" %)Signal indicating the BMS power status\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes\|(% style="width:120px" %)Power up\|(% style="width:50px" %)PUP\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 25
	70	\|(% style="width:167px" %)Precharging\|(% style="width:387px" %)Command to control the precharging contactor\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes\|(% style="width:120px" %)Precharging\|(% style="width:50px" %)PCH\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 12
	71	\|(% style="width:167px" %)Ready to charge\|(% style="width:387px" %)Signal showing that the battery is ready for charging\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes\|(% style="width:120px" %)Ready to charge\|(% style="width:50px" %)RTC\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 23
	72	\|(% style="width:167px" %)Ready to discharge\|(% style="width:387px" %)Signal showing that the battery is ready for discharging\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes\|(% style="width:120px" %)Ready to disch.\|(% style="width:50px" %)RTD\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 24
	73	\|(% style="width:167px" %)Service reset\|(% style="width:387px" %)Command to restart the device\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes*\|(% style="width:120px" %)Service reset\|(% style="width:50px" %)SR\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 21
	74	\|(% style="width:167px" %)Shutdown request (Combilift)\|(% style="width:387px" %)Command to open the dischrging contactor from the Combilift truck\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes*\|(% style="width:120px" %)Combilift shutd.\|(% style="width:50px" %)CSH\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 13
	75	\|(% style="width:167px" %)Shutdown request (HYG/Spirit)\|(% style="width:387px" %)Command to open the dischrging contactor from the HYG truck\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes*\|(% style="width:120px" %)HYG shutdown\|(% style="width:50px" %)HSH\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 10
	76	\|(% style="width:167px" %)Voltage too high for charging\|(% style="width:387px" %)Signal indicating that the battery is fully charged\|(% style="width:157px" %)Yes\|(% style="width:76px" %)Yes\|(% style="width:78px" %)Yes*\|(% style="width:120px" %)Volt. too high\|(% style="width:50px" %)VTH\|(% style="width:237px" %) \|(% style="width:250px" %)0x2009-0x200A, bit 7
9.46	77
9.63	78	(% class="wikigeneratedid" %)
24.4	79	~* Cannot be assigned to discrete outputs and relays.
9.62	80
20.2	81	== Errors ==
1.65	82
28.1	83
	84	Below is the list of BMS errors. General error can be assigned to discrete output.
	85
	86	* Status values: Off = 0, On = 1.
	87
26.18	88	(% style="width:1533px" %)
28.1	89	\|(% colspan="1" rowspan="2" style="width:171px" %)Name \|(% colspan="1" rowspan="2" style="width:324px" %)Description\|(% colspan="1" rowspan="2" style="width:61px" %)Is a critical error?\|(% colspan="3" rowspan="1" style="width:215px" %)Compatibility\|(% colspan="2" rowspan="1" style="width:180px" %)BMS Display\|(% colspan="1" rowspan="2" style="width:265px" %)CANopen SDO, r/o\|(% colspan="1" rowspan="2" style="width:306px" %)Modbus
26.22	90	\|=(% style="width: 92px;" %)Mini S / Mini\|=(% style="width: 66px;" %)Main 2.1\|=(% style="width: 56px;" %)Main 3\|=(% colspan="1" style="width: 126px;" %)Short name\|=(% style="width: 54px;" %)Abbr.
26.36	91	\|(% style="width:171px" %)ADC error\|(% style="width:324px" %)Error of the ADC that measures the battery current\|(% style="width:61px" %)Yes\|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)ADC error\|(% style="width:54px" %)ADC\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 19. Off = 0, On = 1.
26.23	92	\|(% style="width:171px" %)Battery cover error\|(% style="width:324px" %)Battery cover is open\|(% style="width:61px" %)Yes\|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Battery cover\|(% style="width:54px" %)BCE\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 5. Off = 0, On = 1.
26.29	93	\|(% style="width:171px" %)Cell count error\|(% style="width:324px" %)Number of cells does not match the specified value\|(% style="width:61px" %)Yes\|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Cell count\|(% style="width:54px" %)CEL\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 12. Off = 0, On = 1.
26.38	94	\|(% style="width:171px" %)CH contactor cycles error\|(% style="width:324px" %)Switching frequency of the charging contactor is too high\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)CH cont. cycle\|(% style="width:54px" %)CCC\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 21. Off = 0, On = 1.
26.46	95	\|(% style="width:171px" %)CH contactor feedback error\|(% style="width:324px" %)The control signal for the charging contactor and the contactor feedback differ\|(% style="width:61px" %)Yes\|(% style="width:92px" %) \|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)CH cont. feed.\|(% style="width:54px" %)CCF\|(% style="width:265px" %) \|(% style="width:306px" %)0x200E-0x200F, bit 6. Off = 0, On = 1.
26.50	96	\|(% style="width:171px" %)CH/DCH contactor feedback error\|(% style="width:324px" %)The control signal for the charging/discharging contactor and the contactor feedback differ\|(% style="width:61px" %)Yes\|(% style="width:92px" %) \|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)C/D cont. feed.\|(% style="width:54px" %)CDF\|(% style="width:265px" %) \|(% style="width:306px" %)0x200E-0x200F, bit 10. Off = 0, On = 1.
26.32	97	\|(% style="width:171px" %)Combilift offline\|(% style="width:324px" %)Connection with the Combilift forklift is lost\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Combilift offl.\|(% style="width:54px" %)COM\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 15. Off = 0, On = 1.
26.52	98	\|(% style="width:171px" %)Contactor feedback error\|(% style="width:324px" %)Failure of one of the contactors feedback signal. Which contactor is failed can be found in "Signals -> MOSFETs -> Contactor feedback" section of the BMS Mini device\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %) \|(% style="width:56px" %) \|(% style="width:126px" %)Cont. feed. er.\|(% style="width:54px" %)CFE\|(% style="width:265px" %) \|(% style="width:306px" %)0x200E-0x200F, bit 12. Off = 0, On = 1.
26.27	99	\|(% style="width:171px" %)Critical error\|(% style="width:324px" %)Critical system error, the BMS is damaged\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Critical error\|(% style="width:54px" %)CER\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 10. Off = 0, On = 1.
26.28	100	\|(% style="width:171px" %)Crown error\|(% style="width:324px" %)Connection with the Crown forklift is lost\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Crown error\|(% style="width:54px" %)CRO\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 11. Off = 0, On = 1.
26.60	101	\|(% style="width:171px" %)Current limit error\|(% style="width:324px" %)Charging or discharging current is more than the limit calculated by Charge map or Discharge map\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %) \|(% style="width:56px" %)Yes\|(% style="width:126px" %)Cur. limit error\|(% style="width:54px" %)CLE\|(% style="width:265px" %) \|(% style="width:306px" %)0x200E-0x200F, bit 19. Off = 0, On = 1.
26.37	102	\|(% style="width:171px" %)Current sensor error\|(% style="width:324px" %)Error in the current sensor circuit\|(% style="width:61px" %)Yes\|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Current sensor\|(% style="width:54px" %)CSE\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 20. Off = 0, On = 1.
26.39	103	\|(% style="width:171px" %)DCH contactor cycles error\|(% style="width:324px" %)Switching frequency of the discharging contactor is too high\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)DCH cont. cycle\|(% style="width:54px" %)DCC\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 22. Off = 0, On = 1.
26.47	104	\|(% style="width:171px" %)DCH contactor feedback error\|(% style="width:324px" %)The control signal for the discharging contactor and the contactor feedback differ\|(% style="width:61px" %)Yes\|(% style="width:92px" %) \|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)DCH cont. feed.\|(% style="width:54px" %)DCF\|(% style="width:265px" %) \|(% style="width:306px" %)0x200E-0x200F, bit 7. Off = 0, On = 1.
26.44	105	\|(% style="width:171px" %)FS error\|(% style="width:324px" %)SD card read/write error\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)FS error\|(% style="width:54px" %)FSE\|(% style="width:265px" %) \|(% style="width:306px" %)0x200E-0x200F, bit 3. Off = 0, On = 1.
26.53	106	\|(% style="width:171px" %)General error\|(% style="width:324px" %)Special configurable error depending on other errors\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes*\|(% style="width:126px" %)General error\|(% style="width:54px" %)GE\|(% style="width:265px" %) \|(% style="width:306px" %)0x200E-0x200F, bit 13. Off = 0, On = 1.
26.34	107	\|(% style="width:171px" %)High contactor temperature\|(% style="width:324px" %)Temperature of a contactor is too high\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Hi. cont. temp.\|(% style="width:54px" %)HCT\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 17. Off = 0, On = 1.
26.23	108	\|(% style="width:171px" %)High humidity\|(% style="width:324px" %)Increased humidity inside the battery\|(% style="width:61px" %) \|(% style="width:92px" %) \|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)High humidity\|(% style="width:54px" %)HHU\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 6. Off = 0, On = 1.
26.26	109	\|(% style="width:171px" %)High Logic temperature\|(% style="width:324px" %)At least one of the Logic devices is overheated\|(% style="width:61px" %) \|(% style="width:92px" %) \|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Hi. Logic temp.\|(% style="width:54px" %)HLT\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 8. Off = 0, On = 1.
26.44	110	\|(% style="width:171px" %)High temperature (CH)\|(% style="width:324px" %)Temperature is too high for charging\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)High temp. CH\|(% style="width:54px" %)HTC\|(% style="width:265px" %) \|(% style="width:306px" %)0x200E-0x200F, bit 1. Off = 0, On = 1.
26.23	111	\|(% style="width:171px" %)High temperature (DCH)\|(% style="width:324px" %)Temperature is too high for discharging\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)High temp. DCH\|(% style="width:54px" %)HTD\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 4. Off = 0, On = 1.
26.54	112	\|(% style="width:171px" %)High voltage fault\|(% style="width:324px" %)Failure of high voltage measuring circuits\|(% style="width:61px" %)Yes\|(% style="width:92px" %) \|(% style="width:66px" %) \|(% style="width:56px" %)Yes\|(% style="width:126px" %)HV fault\|(% style="width:54px" %)HVF\|(% style="width:265px" %) \|(% style="width:306px" %)0x200E-0x200F, bit 14. Off = 0, On = 1.
26.56	113	\|(% style="width:171px" %)HVIL error\|(% style="width:324px" %)Breakage of high-voltage interlock current loop\|(% style="width:61px" %)Yes\|(% style="width:92px" %) \|(% style="width:66px" %) \|(% style="width:56px" %)Yes\|(% style="width:126px" %)HVIL error\|(% style="width:54px" %)HE\|(% style="width:265px" %) \|(% style="width:306px" %)0x200E-0x200F, bit 16. Off = 0, On = 1.
26.30	114	\|(% style="width:171px" %)HYG offline\|(% style="width:324px" %)Connection with the HYG forklift is lost\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)HYG offline\|(% style="width:54px" %)HYG\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 13. Off = 0, On = 1.
26.48	115	\|(% style="width:171px" %)Insulation fault\|(% style="width:324px" %)Insulation resistance is too low\|(% style="width:61px" %)Yes\|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Insulation fault\|(% style="width:54px" %)INF\|(% style="width:265px" %) \|(% style="width:306px" %)0x200E-0x200F, bit 8. Off = 0, On = 1.
26.35	116	\|(% style="width:171px" %)Logic count error\|(% style="width:324px" %)The number of BMS Logic devices differs from the required value\|(% style="width:61px" %) \|(% style="width:92px" %) \|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Logic count\|(% style="width:54px" %)LOG\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 18. Off = 0, On = 1.
26.22	117	\|(% style="width:171px" %)Logic offline (Cell monitor offline)\|(% style="width:324px" %)BMS Main devices: at least one of the Logic devices is offline.
26.26	118	BMS Mini devices: connection with cell monitor is lost.\|(% style="width:61px" %)Yes\|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Logic offline\|(% style="width:54px" %)LOF\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 9. Off = 0, On = 1.
26.44	119	\|(% style="width:171px" %)Low temperature (CH)\|(% style="width:324px" %)Temperature is too low for charging;\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Low temp. CH\|(% style="width:54px" %)LTC\|(% style="width:265px" %) \|(% style="width:306px" %)0x200E-0x200F, bit 0. Off = 0, On = 1.
26.23	120	\|(% style="width:171px" %)Low temperature (DCH)\|(% style="width:324px" %)Temperature is too low for discharging;\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Low temp. DCH\|(% style="width:54px" %)LTD\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 3. Off = 0, On = 1.
26.51	121	\|(% style="width:171px" %)Main contactor feedback error\|(% style="width:324px" %)The control signal for the main contactor and the contactor feedback differ\|(% style="width:61px" %)Yes\|(% style="width:92px" %) \|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Main cont. feed.\|(% style="width:54px" %)MCF\|(% style="width:265px" %) \|(% style="width:306px" %)0x200E-0x200F, bit 11. Off = 0, On = 1.
26.44	122	\|(% style="width:171px" %)Mount error\|(% style="width:324px" %)SD card cannot be mounted\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Mount error\|(% style="width:54px" %)MNT\|(% style="width:265px" %) \|(% style="width:306px" %)0x200E-0x200F, bit 2. Off = 0, On = 1.
26.31	123	\|(% style="width:171px" %)Need acknowledge\|(% style="width:324px" %)There is an unacknowledged error in error journal\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Need ACK\|(% style="width:54px" %)ACK\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 14. Off = 0, On = 1.
26.43	124	\|(% style="width:171px" %)No temperature sensors\|(% style="width:324px" %)The device has no temperature sensors connected\|(% style="width:61px" %)Yes\|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)No temp. sens.\|(% style="width:54px" %)NTS\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 27. Off = 0, On = 1.
26.23	125	\|(% style="width:171px" %)Overcurrent\|(% style="width:324px" %)The battery current is too high\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Overcurrent\|(% style="width:54px" %)OC\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 0. Off = 0, On = 1.
	126	\|(% style="width:171px" %)Overvoltage\|(% style="width:324px" %)Voltage of any cell is too high\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Overvoltage\|(% style="width:54px" %)OV\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 2. Off = 0, On = 1.
26.49	127	\|(% style="width:171px" %)PCH contactor feedback error\|(% style="width:324px" %)The control signal for the precharging contactor and the contactor feedback differ\|(% style="width:61px" %)Yes\|(% style="width:92px" %) \|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)PCH cont. feed.\|(% style="width:54px" %)PCF\|(% style="width:265px" %) \|(% style="width:306px" %)0x200E-0x200F, bit 9. Off = 0, On = 1.
26.58	128	\|(% style="width:171px" %)Power fault\|(% style="width:324px" %)External devices power supply error: current sensors, HVIL, BMS Logic or CAN2 (int) bus powered devices\|(% style="width:61px" %)Yes\|(% style="width:92px" %) \|(% style="width:66px" %) \|(% style="width:56px" %)Yes\|(% style="width:126px" %)Power fault\|(% style="width:54px" %)PF\|(% style="width:265px" %) \|(% style="width:306px" %)0x200E-0x200F, bit 18. Off = 0, On = 1.
26.55	129	\|(% style="width:171px" %)Power switch error\|(% style="width:324px" %)Short circuit in contactor coil control circuit or power switch overheating\|(% style="width:61px" %)Yes\|(% style="width:92px" %) \|(% style="width:66px" %) \|(% style="width:56px" %)Yes\|(% style="width:126px" %)PSW error\|(% style="width:54px" %)PSE\|(% style="width:265px" %) \|(% style="width:306px" %)0x200E-0x200F, bit 15. Off = 0, On = 1.
26.57	130	\|(% style="width:171px" %)Precharge error\|(% style="width:324px" %)Capacitive load pre-charge process did not end during the estimated time\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Precharge error\|(% style="width:54px" %)PE\|(% style="width:265px" %) \|(% style="width:306px" %)0x200E-0x200F, bit 17. Off = 0, On = 1.
26.43	131	\|(% style="width:171px" %)Settings error\|(% style="width:324px" %)Wrong checksum of the device settings\|(% style="width:61px" %) \|(% style="width:92px" %) \|(% style="width:66px" %)Yes\|(% style="width:56px" %) \|(% style="width:126px" %)Settings err.\|(% style="width:54px" %)SET\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 25. Off = 0, On = 1.
26.33	132	\|(% style="width:171px" %)Short circuit\|(% style="width:324px" %)Flowing high battery currents during a long time\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Short circuit\|(% style="width:54px" %)SHC\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 16. Off = 0, On = 1.
26.41	133	\|(% style="width:171px" %)Shunt error\|(% style="width:324px" %)Internal error of the shunt current sensor\|(% style="width:61px" %)Yes\|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Shunt error\|(% style="width:54px" %)SHE\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 24. Off = 0, On = 1.
26.40	134	\|(% style="width:171px" %)Shunt offline\|(% style="width:324px" %)Connection with the shunt current sensor is lost\|(% style="width:61px" %)Yes\|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Shunt offline\|(% style="width:54px" %)SHO\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 23. Off = 0, On = 1.
26.43	135	\|(% style="width:171px" %)Spirit offline\|(% style="width:324px" %)Connection with the Spirit forklift is lost\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Spirit offline\|(% style="width:54px" %)SPI\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 29. Off = 0, On = 1.
26.45	136	\|(% style="width:171px" %)Stuck contactor\|(% style="width:324px" %)Some contactor got stuck\|(% style="width:61px" %)Yes\|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Stuck contactor\|(% style="width:54px" %)STC\|(% style="width:265px" %) \|(% style="width:306px" %)0x200E-0x200F, bit 5. Off = 0, On = 1.
26.43	137	\|(% style="width:171px" %)Temperature sensor is shorted\|(% style="width:324px" %)Some temperature sensors are shorted\|(% style="width:61px" %)Yes\|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Shorted temp.\|(% style="width:54px" %)TSS\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 28. Off = 0, On = 1.
26.44	138	\|(% style="width:171px" %)Unallowable charging\|(% style="width:324px" %)Charging the battery through the discharging contactor\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Unallowable CH\|(% style="width:54px" %)UCH\|(% style="width:265px" %) \|(% style="width:306px" %)0x200E-0x200F, bit 4. Off = 0, On = 1.
26.23	139	\|(% style="width:171px" %)Undervoltage\|(% style="width:324px" %)Voltage of any cell is too low\|(% style="width:61px" %) \|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Undervoltage\|(% style="width:54px" %)UV\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 1. Off = 0, On = 1.
26.24	140	\|(% style="width:171px" %)Water\|(% style="width:324px" %)There is water in the battery enclosure\|(% style="width:61px" %)Yes\|(% style="width:92px" %) \|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)Water\|(% style="width:54px" %)WHU\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 7. Off = 0, On = 1.
26.43	141	\|(% style="width:171px" %)WDT reset\|(% style="width:324px" %)Watchdog timer reset the device\|(% style="width:61px" %)Yes\|(% style="width:92px" %)Yes\|(% style="width:66px" %)Yes\|(% style="width:56px" %)Yes\|(% style="width:126px" %)WDT reset\|(% style="width:54px" %)WDT\|(% style="width:265px" %) \|(% style="width:306px" %)0x2007-0x2008, bit 26. Off = 0, On = 1.
1.68	142
21.2	143	~* The signal can be assigned to discrete outputs and relays.

Wiki source code of Battery controllers: signals, states and errors

Applications

Navigation